nblida.com
ENCNES

DOWNLOAD SAMPLE

News

  • How to choose the size of standard cylinder

    How to choose the size of standard cylinder

    1. The standard cylinder(https://www.nblida.com/product/actuators/) is one of the most widely used cylinders. 2. The main features and advantages of standard cylinders (1) The cylinder diameter is divided into 32~320mm, and the cylinder stroke can reach 2000mm. (2) The front and rear end caps of the...

    Oct 30,2020 News
  • What is the function of the sensor on the cylinder?

    What is the function of the sensor on the cylinder?

    What is the function of the sensor on the cylinder? 1. A magnetic switch or other switch sensor can be installed on the cylinder. Its function is to sense the working state of the cylinder, so that the control circuit can receive the signal of the sensor switch to make the next action. 2. For exampl...

    Oct 16,2020 News
  • What are the types of cylinders?

    What are the types of cylinders?

    Pneumatic actuators (https://www.nblida.com/product/air-treatment/) that convert the pressure energy of compressed gas into mechanical energy in pneumatic transmission. There are two types of cylinders: reciprocating linear motion and reciprocating swing. The cylinders for reciprocating linear motio...

    Oct 10,2020 News
  • How to choose a cylinder

    How to choose a cylinder

    The movement speed of the cylinder is mainly determined by the needs of the driven working mechanism. When the speed is required to be slow and stable, a gas-liquid damping cylinder or throttle speed control should be used. Throttle speed regulation methods are as follows: horizontal installation th...

    Sep 30,2020 News
  • The working principle of the rodless cylinder and the difference with the rod cylinder

    The working principle of the rodless cylinder and the difference with the rod cylinder

    Working principle of rodless cylinder The working principle of the rodless cylinder is the same as the ordinary cylinder, except that the external connecting seal is different. Both sides of the cylinder are hollow. The permanent magnet in the piston rod drives another magnet (moving part) outside t...

    Sep 25,2020 News
  • Comparison of purchase and application costs of cylinders and electric actuators

    Comparison of purchase and application costs of cylinders and electric actuators

             Generally speaking, electric servo drives are more expensive than pneumatic servo drives, but it also depends on specific requirements and occasions. Some low-power DC motors constitute an electric sliding table (electric servo system) which is actually cheaper than a pneumatic servo system...

    Sep 18,2020 News