-
Comparison of technical performance advantages of cylinder and electric actuator
As we all know, compared with electric actuators, cylinders (https://www.nblida.com/product/actuators/) can work reliably under harsh conditions, and are simple to operate, and can basically be maintenance-free. Cylinders are good at reciprocating linear motion, especially suitable for the most tran...
Sep 11,2020 News -
What to do if the cylinder is broken
1. The joint surface of the cylinder with large deformation or serious steam leakage should be scraped by grinding the joint surface. If the deformation of the upper cylinder joint surface is within 0.05mm, the upper cylinder joint surface is the reference surface, and the lower cylinder joint surfa...
Sep 03,2020 News -
What are the common failures and causes of cylinders
The cylinder is made of casting. After the cylinder leaves the factory, it must undergo aging treatment to completely eliminate the internal stress generated by the cylinder during the casting process. If the aging time is short, the processed cylinder will deform in future operations. The force of ...
Aug 28,2020 News -
What is the composition of the cylinder?
The cylinder is composed of a cylinder tube, an end cover, a piston, a piston rod and a seal, etc. 1) Cylinder The inner diameter of the cylinder represents the output force of the cylinder. The piston should slide smoothly back and forth in the cylinder, and the surface roughness of the inner surfa...
Aug 21,2020 News -
What is a cylinder? What are the types of cylinders?
A cylindrical metal part that guides the piston to reciprocate linearly in the cylinder. Air converts thermal energy into mechanical energy through expansion in the engine cylinder; gas is compressed by the piston in the compressor cylinder to increase the pressure. The casings of turbines, rotary p...
Aug 14,2020 News -
Maintenance of pneumatic products
If a set of pneumatic device is not well maintained and used improperly, the equipment will be damaged prematurely or frequently, making the equipment "retired" in advance. Therefore, it is necessary to carry out regular maintenance and repair in time if any problems are found, so as to extend the s...
May 09,2020 Industry News
Copyright © Ningbo Lida Pneumatic Complete Co., Ltd. Rights Reserved.
