What is the application field of standard cylinder?

What is the application field of standard cylinder?

1. The standard cylinder will not tighten the bolts of the joint surface during use. Use a jack to gently push the upper cylinder back and forth. During use, the joint surface of the lower cylinder can be scraped off according to the red color. This is suitable for high-pressure cylinders with relatively strong structural rigidity.

2. The bolts on the tight joint surface of the standard cylinder can effectively measure the value and press traces to scrape off the joint surface according to the strictness of the joint surface of the plug, so as to eliminate the influence of the vertical arc of the standard cylinder on the gap.

3. Standard cylinders already occupy a large market in China, and many companies are also gaining economic benefits. The new materials used in the production process are effectively combined with new technologies. The standard cylinders are highly energy-efficient, environmentally friendly and have a long lifespan during use. High reliability.

4. The volume of the standard cylinder is very small and the weight is very light. This product is very suitable in the case of small flow. If there is a joint surface with large deformation or serious air leakage during use, the research joint surface should be used effectively.

5. If the deformation of the upper cylinder joint surface of the standard cylinder is within 0.05mm, the upper cylinder joint surface is the standard, and the lower cylinder joint surface can be effectively coated with red lead or blue paper, and the cylinder is scraped out according to the traces. When the combined deformation is large, red lead can be applied to the upper cylinder.

6. The joint surface of the standard cylinder should be steam cleaned or corroded. In the process of use, select an appropriate electrode to smooth the groove marks, and then effectively use a wooden board or a flat rule to dig out the marks. In order to study the weld bead and the joint surface, they must be in the same plane

Ningbo Lida Pneumatic Complete Co., Ltd is Standard Cylinders Manufacturers in China，we supply standard cylinder,high pressure air regulator, air control valve and so on.Visit our website: https://www.nblida.com/ (pneumatic directional control valve Manufacturers)