What is the repair method for cylinder leakage?

What is the repair method for cylinder leakage?

There is internal leakage in the cylinder, and the leaking part cannot be seen from the outside, but the thrust (or pulling force) of the cylinder is insufficient. Disconnect the exhaust port to check that there is air discharge, check and replace the piston ring seal, and check whether the inner wall of the cylinder is worn or not.

If there is air leakage outside the cylinder, replace the relevant rod seal and dust ring

When the cylinder runs to the end, the impact force is large, and the buffer port is reduced.

When the cylinder runs to the terminal, the speed drops significantly, and the thrust cannot meet the requirements. Check to clear the buffer port.

The inner wall of the cylinder barrel is seriously worn. Check and replace the piston rod. Always do a good job in maintaining the cylinder. Use a clean air source. The air source needs to be installed with pneumatic triple parts for lubrication and filtration. Once oil mist lubrication is performed in the air source, it must be ensured Can not be interrupted, keep oil in the lubricator.

Ningbo Lida Pneumatic Complete Co., Ltd is is founded in 1994, pneumatic cylinder Manufacturers. is professional to provide customers the pneumatic execution, direction control, air source treatment, and all kinds of auxiliary services and personalized solutions. Our company area has 10000 square and adopted the ISO9001:2015 quality management system certification, the United Kingdom QEC certification and CE certification.